Jobe Wakeboard Towers

Addict Tower 1.5
Addict Tower 1.5 Anodised or Polished
Made by Jobe
Brand new this year, the Addict 1.5 tower with 2 inch diameter 6061 T6 aircraft grade aluminum tubing and aggressive tribal shaped side-arms! If you like to show off, this is the perfect tower for you! Both tribal arms have an unique square shaped wakeboard rack integrated. This tower fits on any boat from 76 - 108 inches in width, and can also be folded down above the horizontal side bars.
Telescoping top section
2" diameter tubing
Fits boat-decks from (at least) 76" to 108" in width
Anodised version: Aluminum poles are anodized to increase corrosion resistance and surface hardness.
RRP from £999.95

Addict Quick-Release Mirror Arm w. Mirror
Easy to mount on your Jobe tower
Super easy connect / disconnect system
Fits all towers with 1.875"-2" tubes
Comes with a 185mm x 370mm safety mirror
Anodized version: aluminum parts are anodized to increase corrosion resistance and surface hardness
Anodised:

Addict Quick-Release Mirror Clamp Anodised
Size: 2.0", 2.5"
Makes the Jobe Quick-Release Mirror Arm compatible with different diameter tubes
Anodized version: Aluminum parts are anodized to increase corrosion resistance and surface hardness
2.25"-2.5":
1.875-2.0"

Addict Pivoting Swivel Board Rack
Super easy access to your boards
Boards swing towards you in a 90 degree angle from the tower
Fits 1.875"-2" tubing
Can be mounted in any desired angle
Bungee securely holds 2 boards
Rubber layer in between the forks protects your board or wakeskate
High polished aluminum finish
Polished:

Addict Tower 1.3
Addict Tower 1.3 Polished or Anodised
Made by Jobe
The Addict 1.3 is the best looking tower on the market. Manufactured with the best aircraft grade aluminium on the market: 6061 T6 The 2 inch tubes look fat and will definitely make heads turn!! The horizontal bars run parallel to most window-lines which makes the tower rigid and stable. This tower fits on boats from 76-108 inch wide. This tower is higher than other towers which will give you that extra airtime and more space to walk around in the boat.
2" diameter tubing
Fits boat-decks from (at least) 76" to 108" in width
Anodised version: Aluminum poles are anodized to increase corrosion resistance and surface hardness.
RRP from £689.95

Addict Quick-Release Swivel Board Rack
Polished or Anodized
Fits Ø 1.875"-2" tubing
Super easy connect / disconnect system
Can be mounted horizontal and vertical
Bungee securely holds 2 boards
O-ring inserts protects your board or wakeskate
High polished aluminium finish
Anodised version: Aluminum parts are anodized to increase corrosion resistance and surface hardness

Addict Light Bar
New bullet shape & improved quality
Comes with 5 chrome lights, includes wiring
2 lights facing one direction, 3 lights face the other
Wiring with protection sleeves and connection plugs
High polished alluminum finish
Fits all Jobe Towers
Polished:

Addict Light Bar Clamp
Makes the Jobe Light Bar compatible with different diameter tubes
Comes in a set of 2

Addict Tower 1.1
Made by Jobe
The Addict 1.1 is manufactured with 2 inch diameter 6061 T6 aircraft grade aluminium tubing It is easy to collapse completely flat. This tower is very simple and easy to install, looks super stylish on any boat and is hard to match in price and performance.
Telescoping top section
2" diameter tubing
Fits boat-decks from (at least) 76" to 108" in width.
RRP £499.95

Addict Swivel Board Rack
Fits Ø 1.875"-2" tubing
Can be mounted horizontal and vertical
Bungee securely holds 2 boards
O-ring inserts protects your board or wakeskate
High polished aluminium finish

Addict Rack Clamp
Makes the Jobe Board and Ski Racks compatible with different diameter tubes
Fits fixed and Quick-Release Jobe Board and Waterski Racks!
Anodised versions: Aluminum clamps are anodized to increase corrosion resistance and surface hardness

Addict Curved Mirror Arm with Mirror
Easy to mount on your Jobe tower
Fits all towers with 1.875"-2" tubes
Comes with a 185mm x 370mm safety mirror
Curved for great visibility
Polished:

Addict Bullet Speakers
Easy to mount on your Jobe tower
Internal wiring system
Overall dimensions: 65"
Mounting diameter: dia 155mm
Nominal Impedance: 4?
Dc Resistance: 36?
Nominal Power Handling: 45W
Max Power Handling: 100W
Polarity Marking: Anod:+(Diaphragm moves forward connected the positive)

Addict Bullet Speaker Clamp
Makes the Jobe Bullet Speakers compatible with different diameter tubes o Comes in a set of 2

Addict Tower Bimini
Size: M, L
Do you need protection against the sun while you are out on your boat? The perfect solution is the Jobe Addict Bimini top with Sunbrella top. Sunbrella is a first-rate fabric that protects against ultra violet radiation, it is fungus and mildew repellent and easy to clean. The bimini is easy to install (you donít need to drill holes in your boat or tower), easy to use and quickly folds backwards for travelling and while not in use. The high quality frame is made out of polished stainless steel. The bimini comes with a cover to protect the fabric while not in use o It will fit all Jobe towers and most other brands.
M: 137cm wide top for boat-decks from 80" to 94" / 203cm to 238cm
L: 155cm wide top for boat-decks from 94" to108" / 238cm to 275cm
Stainless Steel:

Addict Tower Bimini Clamp
Makes the Jobe Bimini compatible with different diameter tubes
Comes in a set of 4

Boat Bimini
Size: S, M, L
Do you need protection against the sun while you are out on your boat? New in the Jobe Collection this year is the practical Boat Bimini. The bimini is easy to install on your boat and provide max protection against sun rays. You donít need a wakeboard tower for installation, this bimini will mount directly on the surface of the boat deck. This bimini is available in two versions:
1. Light weight aluminum frame with UV protected coated nylon top.
2. High quality stainless steel frame with Sunbrella top.
(Sunbrella is a first-rate fabric that protects against UV radiation, it is fungus and mildew repellent and easy to clean).Both versions are complete with support poles and boot, to protect the fabric wile not in use.
S: 67" to 72" (170,5 to 183cm)
M: 73" to 78" (185 to 198cm)
L: 79" to 84" (210 to 213,5cm)

Addict Quick-Release Swivel Waterski Rack
Fits Ø 1.875"-2" tubing
Super easy connect / disconnect system
Can be mounted horizontal and vertical
Bungee securely holds a combo pair
O-ring inserts protects your skis
High polished aluminium finish

Addict Pivoting Swivel Board Rack
Super easy access to your boards
Boards swing towards you in a 90 degree angle from the tower
Fits Ø 1.875"-2" tubing
Can be mounted horizontal and vertical
Bungee securely holds 2 boards
O-ring inserts protects your board or wakeskate
High polished aluminium finish

Addict 5 Light Bar
Comes with 5 chrome lights and wiring
2 lights facing one direction 3 lights face the other
Includes wiring sleeves and plugs
High polished aluminium finish
Fits all Jobe towers

Addict Light Bar Clamp
Makes the Jobe Light Bar compatible with different diameter tubes
Comes in a set of 2
2.25"-2.5"

Addict Mirror Arm with Mirror
Easy to mount on your Jobe tower
Fits all towers with 1.875"-2" tubes
Comes with a 185mm×370mm safety mirror
Curved for great visibility

Addict Quick-Release Mirror Arm with Mirror
Easy to mount on your Jobe tower
Super easy connect / disconnect system
Fits all towers with 1.875"-2" tubes
Comes with a 185mm×370mm safety mirror
Anodized version: Aluminum parts are anodized to increased corrosion resistance and surface hardness